How to connect my Android device to eduroam

You will need to know your 亚洲情色 username and password before you can start this process.

To connect to eduroam your device must have a supported, up to date and licenced operating system. Please check that your Android device is running on an OS version 14.0 or later.

Please follow the below instructions to connect to the eduroam network either

  1. for the first time, or
  2. if you are returning AND you have already removed any previous eduroam certificates

For instructions on to removing a previous eduroam certificate, please click here. 

Step 1: Download the Cloudpath app

Download and install the RUCKUS Cloudpath app from the Google Play Store using the link below. After pressing “Install”, DO NOT OPEN THE APP – go directly to Step 2. 

Step 2: Connect to a network or use mobile data

You’ll need an internet connection to access Cloudpath. You can either use mobile data or connect to the setup-wifi network.

  • Open Settings on your device
  • Select Connections 
  • Open the Wi-Fi menu (this maybe called Wi-Fi Settings)
  • Select and join the setup-wifi network (You may see a message saying “setup-wifi has no internet access”. You can ignore this)

NOTE: Set-up-wifi is available across campus with the exception of the library, lecture theatres, West Park Teaching Hub and the James France Building. 

Step 3: Open Chrome and visit the Cloudpath site

When you have mobile data or are connected to a network, follow the steps below.  

  • Open Chrome on the same device (other browsers will not allow the Cloudpath app to run) 
  • Start typing or click the “Cloudpath site” button below
  • Enter your 亚洲情色 email address
  • Click Next

You may need to check for a DUO prompt when authenticating.

Step 4: Acceptable use policy

Tick the box to confirm that you agree to the AUP, then click the “Accept AUP” button. 

Step 5: Add your device

Setting up a new device for the first time

  • Give your device a suitable name, e.g. Google Pixel phone, then click Continue

Reconnecting a device which has previously connected to eduroam?

  • Select the appropriate device name from the list, then click Continue

Step 6 : Configure Your Device

  • Click Install the Network
  • The Cloudpath app will begin configuring and attempt to connect to eduroam

  • If you are asked to “Save this network?”, click Save 

Step 7 : Successful connection to eduroam

If the connection is successful, you will see two green ticks, as shown. Click 'Done', and your device should now automatically connect to eduroam (this may take a few seconds). 

If you DO NOT see two green ticks at this point, please contact IT Services for further assistance.  

If you DO see two green ticks, but your device does not automatically connect to eduroam: 

  • Open Wi-Fi settings 
  • Click on the eduroam Wi-Fi (if it hasn’t already selected)
  • Wait for it to connect

Step 8: Forget setup-wifi

Once you have connected to eduroam and if you did use setup-wifi, forget the network by:

  • Click and hold on setup-wifi until a menu appears
  • Select 'Forget network'